- Messages
- 790
- Reactions
- Points
- 93
Works perfectly fine for me. You may be using a cua dilo, which is not fully supported. Or you've put some weird settings on the anus. The defaults are like this:
Last edited:
- Thread starter CheesyFX
- Start date
Works perfectly fine for me. You may be using a cua dilo, which is not fully supported. Or you've put some weird settings on the anus. The defaults are like this:
KumaMountain
New member
- Messages
- 20
- Reactions
- Points
- 3
Thank you very much!
I set it back to the default values and it slowed down a bit.
If possible, I would be very happy to see an update that would allow me more flexibility in changing the speed the Stretch value decreases!
And it would be great if the Twink intensity could be adjusted as well!
- Messages
- 790
- Reactions
- Points
- 93
If you set Gape Regression to 0 it will be persistent. What more can you ask?
KumaMountain
New member
- Messages
- 20
- Reactions
- Points
- 3
Yes, I may make Stretch permanent and play with it.
As shown in the image, in the current FillMeUp, the Stretch value changes from 0.3 to 0 over 1 second after waiting 10 seconds.
It would be nice to be able to change this, for example, from 0.3 to 0 over 10 seconds.
- Messages
- 790
- Reactions
- Points
- 93
No, this isn't true. Observe the Stretch slider in my video. It goes down immediately, but slow at first and faster at the end.
KumaMountain
New member
- Messages
- 20
- Reactions
- Points
- 3
The Gape Scale was set too high, which caused Stretch to decrease too quickly.
When I set it to 1, the Stretch now decreases slowly.
Cheeseeater
New member
- Messages
- 2
- Reactions
- Points
- 1
getting this error with FillMeUp:
at CheesyFX.Anus.Init (System.String name) [0x00000] in <filename unknown>:0
at CheesyFX.FillMeUp.Init () [0x00000] in <filename unknown>:0
at MVRPluginManager.CreateScriptController (.MVRPlugin mvrp, DynamicCSharp.ScriptType type) [0x00000] in <filename unknown>:0
using on a male model btw
at CheesyFX.Anus.Init (System.String name) [0x00000] in <filename unknown>:0
at CheesyFX.FillMeUp.Init () [0x00000] in <filename unknown>:0
at MVRPluginManager.CreateScriptController (.MVRPlugin mvrp, DynamicCSharp.ScriptType type) [0x00000] in <filename unknown>:0
using on a male model btw
- Messages
- 790
- Reactions
- Points
- 93
- Messages
- 790
- Reactions
- Points
- 93
Yeah, I tried and realized some inconsistencies with higher gape scales. I may be looking at it once more.
Cheeseeater
New member
- Messages
- 2
- Reactions
- Points
- 1
well that's a shame tbhThen restrain yourself from using it on a male
It is female only.
- Messages
- 790
- Reactions
- Points
- 93
No, it isn't. A male lacks several crucial "features", you know.
Use an AltFuta shaped as a male if you don't want females in your scene. This way you also get a functional anus
alwaysblue
Member
- Messages
- 74
- Reactions
- Points
- 8
!> System.NullReferenceException: Object reference not set to an instance of an object
at CheesyFX.PoseMe.OnAtomRename (System.String oldUid, System.String newUid) [0x00000] in <filename unknown>:0
I get this error whenever I rename anything in a scene, any idea what causes this?
at CheesyFX.PoseMe.OnAtomRename (System.String oldUid, System.String newUid) [0x00000] in <filename unknown>:0
I get this error whenever I rename anything in a scene, any idea what causes this?
I don't know if Im doing something wrong.
Ive been trying out the dialogue system, writing a few lines, adding some audio. Everything works nicely, as expected.
Until the next time i try to load the scene.
Then its all gone. The only pose which remains is the first one, regardless of how many/few/complex the poses are.
Am i missing something or does it not save with the scene?
edit:
Ok, so now i set up a very basic test scene, and it loads with dialogue intact.
I tried the same plugin chain, same char, now its working.
But it is still worrysome, i did a lot of work triggering sounds and actions which is now lost.
Would it be possible to make a saveall/backupbutton or something like that, so we can reload our work if something else in vam is breaking the plug?
Ive been trying out the dialogue system, writing a few lines, adding some audio. Everything works nicely, as expected.
Until the next time i try to load the scene.
Then its all gone. The only pose which remains is the first one, regardless of how many/few/complex the poses are.
Am i missing something or does it not save with the scene?
edit:
Ok, so now i set up a very basic test scene, and it loads with dialogue intact.
I tried the same plugin chain, same char, now its working.
But it is still worrysome, i did a lot of work triggering sounds and actions which is now lost.
Would it be possible to make a saveall/backupbutton or something like that, so we can reload our work if something else in vam is breaking the plug?
Last edited:
- Messages
- 790
- Reactions
- Points
- 93
I don't know what scene content could break poses, but reloading BL restores the settings as they are in the scene file. Alternatively you can extract the poses from one scene file into another. Thats basically your "save all" function.
Yeah, but this is not only the poses, all the dialogue disappeared. Triggers for clothes (nothing fancy just load clothingpresets), some cycleforce on/off.
Just went away, like it had never saved. Thats why i was hoping for a backup button.
I tried reloading BL in the broken scene, but it's all gone.
Recreated the same scene, (one girl, a cua sofa, one light, and now it works.. Same pluginchain.
and so i don't forget: This plugin is amazing. You basically did in one plug all i had crafted via complicated pluginchains which always broke after updates.
Great job!
(and a small wish: don't overdo it like the Alive plugin, and reinvent stuff which doesnt need reinventing. So far you have been keeping it superfunctional and easy.)
- Messages
- 790
- Reactions
- Points
- 93
Ok, this could be the culprit. I'll check.
Everything is stored within the pose. So if you extract or import a pose you'll import all dialogs including text and audio with it. No need for an extra backup button. It couldn't do more than that.
- Messages
- 790
- Reactions
- Points
- 93
How big is your audio file (length and file size)?
- Messages
- 790
- Reactions
- Points
- 93
Last edited:
- Messages
- 790
- Reactions
- Points
- 93
It makes people cum on pose/cam enter.
- Messages
- 790
- Reactions
- Points
- 93
Hmm, very cool idea! It's just the UI that bothers me a little.
But I think this should be fairly easy to do. I'll take it a step further though: There will be either
- a separate cum dialog pool for each person which can be configured from within ReadMyLips. Every time the person cums a random dialog from this pool is played. If you mix up the actors targeted this could be really cool, e.g. have him shout out or have her comment on his orgasm
- an option to select a level of the existing pool that is played on orgasm. The problem would be the person mapping. You may want to have different levels played based on which person is cumming.
thank you
