Scenes Slut show - Your personal Exhibition Hall

[supperGR]

Thanks for the reply!
The pose is Lewd-Slut 31, I am quite sure there are outdated expression morphs saved in the scene, but I tried download all the old expression morphs from AshAuryn (some older ones are not available anymore), but the problem still there. Maybe you could upload your morph dependencies here?
Here is the error:
View attachment 505982

Btw, that would be a good idea removing the water scene, it deserves a new scene (I also kinda like the Slut Show 3d logo from earlier releases, is it possible to make it optional?)

Got it!!

So I turned to searching the scene's JSON file and indeed found ‘Name’: ‘morph: Disbelief1’ and “Name”: ‘morph: Curious1’

So the morph Curious1 doesnt exist, but there is Curious2, it seems the timeline cannot load the new morph

The ‘Curious2’ you mentioned in your previous reply does not exist in the scene after searching, so the issue is solely with Disbelief1 and Curious1.

After rechecking the timeline, found that these two morphs are only called in the opening animation of the ‘Profile image’ mode, so you can test whether entering the mode causes an error.
A permanent solution: locate the segment ‘asdgqe ps hole’ in the person's timeline, find Curious1 and Disbelief1 in the geometry, select and remove them, and the error should never bother u. I suspect your situation may be a random bug.

(I also kinda like the Slut Show 3d logo from earlier releases, is it possible to make it optional?)

did u mean this one?

（screenshot from ooooold ver..)

In fact, I am currently testing the use of a projection plugin (PluginIdea.DecalSystem) to display the background logo instead of a solid PNG image, as I aim to offer a more versatile presentation style, such as extra-large fonts?
In any case, I will fine-tune it to its optimal state and put it into the scene. Yes, the background logo will return as an optional feature with multiple display modes!!!

 

[Kivi]

Got it!!

So I turned to searching the scene's JSON file and indeed found ‘Name’: ‘morph: Disbelief1’ and “Name”: ‘morph: Curious1’


The ‘Curious2’ you mentioned in your previous reply does not exist in the scene after searching, so the issue is solely with Disbelief1 and Curious1.

After rechecking the timeline, found that these two morphs are only called in the opening animation of the ‘Profile image’ mode, so you can test whether entering the mode causes an error.
A permanent solution: locate the segment ‘asdgqe ps hole’ in the person's timeline, find Curious1 and Disbelief1 in the geometry, select and remove them, and the error should never bother u. I suspect your situation may be a random bug.


did u mean this one?
View attachment 506207（screenshot from ooooold ver..)

In fact, I am currently testing the use of a projection plugin (PluginIdea.DecalSystem) to display the background logo instead of a solid PNG image, as I aim to offer a more versatile presentation style, such as extra-large fonts?
In any case, I will fine-tune it to its optimal state and put it into the scene. Yes, the background logo will return as an optional feature with multiple display modes!!!

‘Curious2’ was from the new AshAuryn expressions.

I removed the two morphs from the ‘asdgqe ps hole’ segment and the error is now gone! But the thing is, also the expressions are gone, it applied to poses too.

I think a better solution is to download the old morphs but I've already tried the old ones available on the Hub, could you locate which packages are for Disbelief1 and Curious1 ?

did u mean this one?

Yes! This was a good idea, I even tried to add my own logos to the background after you removed it Good luck with your work!

(And thanks for the help

 

[Clive Bragin]

Hello very good scene/mod But will be better if it have auto pose function to slide show all posses.

 

[supperGR]

supperGR updated Slut show - Your personal Exhibition Hall with a new update entry:

Background Logo reinstated and more

Ver.69
Update Log



BACKGROUND:
View attachment 509034View attachment 509035View attachment 509036View attachment 509038

Based on @Kivi 's suggestion, the logo has been reinstated and is now an option, new dependency +1
To achieve a more flexible effect, I used @PluginIdea 's DecalSystem plugin to...

Read the rest of this update entry...

 

[Kivi]

supperGR updated Slut show - Your personal Exhibition Hall with a new update entry:

Background Logo reinstated and more



Read the rest of this update entry...

Hey! I am so glad that you accepted my suggestion and make it even more playable Cheers!

 

[supperGR]

Did you manage to replace my default logo with your own? How was it?
This projection scheme may be more suitable for flat logos

 

[Johnnylh]

From version 69,When I load this scene,vam reoprt too many heap sections. Do you have any solutions for this?
My specs:
RTX 4080s
intel core i7-13700kf
64GB RAM DDR5

 

[supperGR]

From version 69,When I load this scene,vam reoprt too many heap sections. Do you have any solutions for this?
My specs:
RTX 4080s
intel core i7-13700kf
64GB RAM DDR5

In my experience, this error is usually caused by insufficient memory, resulting in the program crashing.
However, with 64 GB of memory, this issue should not occur. You can monitor memory usage when loading the scene.
How many var does your AddonPackages have?

With 32 GB of memory on my PC, this scene uses around 9 GB with 2,000 vars

 

[Kivi]

‘Curious2’ was from the new AshAuryn expressions.

I removed the two morphs from the ‘asdgqe ps hole’ segment and the error is now gone! But the thing is, also the expressions are gone, it applied to poses too.

I think a better solution is to download the old morphs but I've already tried the old ones available on the Hub, could you locate which packages are for Disbelief1 and Curious1 ?


Yes! This was a good idea, I even tried to add my own logos to the background after you removed it Good luck with your work!

(And thanks for the help

I have finally found out what was causing the bug, after I updated some plugins, VAM somehow didn't refresh them (normally there should be an "allow this plugin" pop-up after downloading one). And the next time I start VAM, some windows "allow this plugin" pops out but they are not the ones newly downloaded which makes no sense.

The fix is rescanning packages after downloading from VAM. It's wierd that this can cause morphs disappearing. (It took me about 6+hrs to find this out , dunno why i have this bug, maybe it's that i got 5000+ vars installed?)

 

[supperGR]

I have finally found out what was causing the bug, after I updated some plugins, VAM somehow didn't refresh them (normally there should be an "allow this plugin" pop-up after downloading one). And the next time I start VAM, some windows "allow this plugin" pops out but they are not the ones newly downloaded which makes no sense.

The fix is rescanning packages after downloading from VAM. It's wierd that this can cause morphs disappearing. (It took me about 6+hrs to find this out , dunno why i have this bug, maybe it's that i got 5000+ vars installed?)

Glad you finally fix the problem!
This is probably just a random bug, as I encounter strange bugs from time to time, particularly when editing complex scenes. (For example, while editing ‘Afterlife of an Angel,’ the H shortcut suddenly stopped working, and I couldn't use H to toggle the visibility of atoms in the scene...)
I believe Vam2 will perform better in terms of memory management

5,000 var isn't that much. Apart from memory usage and fps drop, there won't be any other issues. I once had 9,000 vars, Currently, I strictly limit the number of vars to less than 2,000, for faster loading and more fps

 

[Johnnylh]

In my experience, this error is usually caused by insufficient memory, resulting in the program crashing.
However, with 64 GB of memory, this issue should not occur. You can monitor memory usage when loading the scene.
How many var does your AddonPackages have?

With 32 GB of memory on my PC, this scene uses around 9 GB with 2,000 vars

I solved this problem, too many var in AddonPackages. thanks for your answer.

 

[LexiOfBodom]

Is there anyway to save pictures as PNG? JPG loses a lot of quality, great scene, i use it almost exclusively now.

 

[supperGR]

Is there anyway to save pictures as PNG? JPG loses a lot of quality, great scene, i use it almost exclusively now.

If you search for PostMagic Atom, you will find the 'supershot setup choice' plugin setup here

 

[boondavvv]

There is any way to fix this mirror bug? Only occurs in this scene and the reflection works for clothes and hair. Also on the smartphone screen the person is invisible..

 

[supperGR]

There is any way to fix this mirror bug? Only occurs in this scene and the reflection works for clothes and hair. Also on the smartphone screen the person is invisible..

View attachment 518295

Hi there
This is a random bug caused by the background logo plugin in version 70. All reflections on character skins will be disabled.
Although this error does not occur all the time, it is still very very annoying

I have asked PluginIdea here about this already, but have not received a reply yet.

In the meantime, you can search for atoms named '00_SetYourLOGOHere', delete it, save the scene and load it again, this will fix this I hope

 

[supperGR]

supperGR updated Slut show - Your personal Exhibition Hall with a new update entry:

Gaze system overhaul, extensive new pose options, and numerous other optimizations

Ver.71
Update Log


CORE FEATURES:

• Rebuild Gaze system with 3 mode now, using my plugin for simple

View attachment 527699

• Pure mode in Custom Env
• replace skybox plugin with Sally.CameraBackgroundColor...

Read the rest of this update entry...

 

[fantasticvoyage]

How do I exit snapshot mode without reloading the whole scene?

 

[supperGR]

How do I exit snapshot mode without reloading the whole scene?

Click SnapSHOT logo in the right top corner, sorry for i didn't make any guid for this

 

[void01x_]

I love this so much that I made a new instance focused on it, but sadly I'm having problems with appearance presets. I'll edit my model, save the preset and when I try to load it I get "Could not load json Custom/Atom/Person/Appearance/Preset_BATempPreset.vap". Also got another error a few times related to HeelAdjust2 that also prevented me from loading up presets. Me sad.

 

[supperGR]

I love this so much that I made a new instance focused on it, but sadly I'm having problems with appearance presets. I'll edit my model, save the preset and when I try to load it I get "Could not load json Custom/Atom/Person/Appearance/Preset_BATempPreset.vap". Also got another error a few times related to HeelAdjust2 that also prevented me from loading up presets. Me sad.

Hi void01x_
Thank you for your feedback!

I'm sorry to hear that you're experiencing some issues, but when I noticed the error mentioned "Preset_BATempPreset.vap," that appearance preset is actually a temporary file name used by JayJayWon's BrowserAssist. When you try to import a character's appearance from Scene B into Scene A using BrowserAssist's import tool, the appearance preset for that character in Scene A will be named Preset_BATempPreset.vap.

I also use BrowserAssist and sometimes import appearances from other scenes. After editing, I try to save them. However, if I import Appearance 1 from Scene B and then immediately import Appearance 2 from Scene C, I encounter an error when trying to save Appearance 2 in the current scene.

I believe this may not be an issue with my scene specifically. It seems like BrowserAssist, despite being a fantastic plugin, still has some bugs maybe

As for the HeelAdjust2 plugin, it can sometimes cause errors, possibly because certain clothing items include other high-heel plugins, which might lead to conflicts. In such cases, you can try temporarily disabling HeelAdjust2 in the character's atom plugins.

If you encounter any other issues, please feel free to provide more details. I’d be more than happy to help resolve them!
And will significantly simplify the slutshow scene in the next version by splitting the SnapSHOT feature out, which might help reduce some potential bugs??

Thanks again for your feedback!!