Ok. I was able to get back in front of the computer. What's happening is that, even though you're only seeing the "transition" trigger panel, when you open the panel, it's actually looking at one of the hidden (probably Start) trigger systems. You have to manually click the Transition tab to get to the transition triggers. Then, when you use those same Reciever Atom, Reciever and Reciever Target, you'll be given the two sliders to adjust. Also, with the settings you gave me above, you likely won't see anything happen. The Head/Neck/chest are all in relative alighment, so a sharp angle like 10 degrees isn't going to be achieved. Set the three nodes and see what min and max angles you can get (by reading the current angle) and then you can set your min and max's more reliably. For those three nodes, you're likely looking at 150 to 175 degrees. I will have to think about adding back the start and end trigger panels, but they still won't actually do anything since their is no start or end to the measurments. I CAN add a threshhold trigger system that, when crossed on either end, can trigger an instant trigger. Let me know if that all makes sense.
