Plugins + Scripts CPU Performance Patch (Up to 30% faster physics, up to 60% more FPS)

Settings For 9950X3D:

SkinMeshPartDLL.ini:

[threads]
computeColliders=8
skinmeshPart=8
applyMorphs=8
skinmeshPartMaxPerChar=8
applyMorphMaxPerChar=8
affinity=1,3,5,7,9,11,13,15

[threadsVR]
computeColliders=8
skinmeshPart=8
applyMorphs=8
skinmeshPartMaxPerChar=8
applyMorphMaxPerChar=8
affinity=1,3,5,7,9,11,13,15


boot.config:
wait-for-native-debugger=0
gfx-enable-gfx-jobs=1
gfx-enable-native-gfx-jobs=1


This CPU Performance Patch is a must have, huge performance boost!

im running vam on a ryzen 7 3800x with a rtx 3080.
Thi Patch is a revelation. a scene that usually takes minutes to load is loaded in under 30 seconds.
Settings on ultra.
CPU benchmark before = 110 fps
CPU benchmark after = 180 fps
Many many thanks, i really needed this

make VAM usable, literally

i9 11900K, RTX 5090, DDR4 64GB (2x32GB)
windowed mode 2560x1377
with default settings in the SkinMeshPartDLL.ini
avg/min/max
170/61/262 -> 224/69/309 (+32%/+13%/+18%)

how can i dowload this Version 12evo (1.22.0.12 & 1.22.0.13)....... my cpu is i9-10900k !! Version 13beta1evo is not working

9800X3D/5090
22% FPS improvement and ~45% Avg TotalTime improvement using my Optimal Settings (RS 1.00, Mirrored Surfaces Enabled, Realtime Reflection Probes off, Generate Depth Texture off, Soft Body Physics on, Shader Quality High, MSAA 4X, Pixel Light Count 6, Smooth Passes 2, Process Priority High, Physics Rate 90 HZ, Physics Update Cap 1, High Quality Physics on, Glow Effects off, Desktop Vsync off)

Official Benchmark results: 10% FPS improvement and 40% Avg TotalTime improvement.

My Patch Optimal settings for the 9800X3D:
SkinMeshPartDLL.ini:
[threads]
computeColliders=8
skinmeshPart=8
applyMorphs=8
skinmeshPartMaxPerChar=8
applyMorphMaxPerChar=8
affinity=1,3,5,7,9,11,13,15

[threadsVR]
computeColliders=4
skinmeshPart=2
applyMorphs=2
skinmeshPartMaxPerChar=4
applyMorphMaxPerChar=2
affinity=1,3,5,7,9,11,13,15

[profiler]
enabled=0

boot.config:
gfx-enable-gfx-jobs=1
gfx-enable-native-gfx-jobs=1
gfx-disable-mt-rendering=0
wait-for-native-debugger=0
gc-max-time-slice=3
single-instance=1

40% faster in 9950x3d, but takes 20% memory than before

i recently used on 12600k and max physcs benchmark got ftom 165 to 245 thats a good improvement boys. thx a lot man... live long

I have a i9-10900K. I followed every steps. And applied the settings of Intel 12600K/12500/12400 since they were the "closests" of mine. I had difficulty to even launch your benchmark itself. Multiples attemps were needed and I had to at least launch one time the animation only thing before being able to start the original benchmark so I lost many time...

There's absolutely no difference between my before and after editing settings (even not for Baseline 3). Not even a single FPS boost. By the way I did not have the final results of the benchmark. Either I did not understand well the text or it was just not there.

If you can help I'd be happy.

Ryzen 7 5700X. Made significant difference in CPU usage. I suppose the CPU was just about bottlenecking the GPU and after this patch, the GPU was now bottlenecking the CPU. If you notice little difference, consider that your GPU could be the cause too. Lowering graphics slightly + using this patch resulted in about 60% more FPS.

7800X3D and 4080 Super. Haven't gotten into the nitty gritty with the actual numbers, but there's definitely an improvement. I can actually have the UI open without tanking my framerate, now. I'm using version 12evo.

Error "Too many heap section" while load a scene, every scene. 7950x3D, 64gb, 4090.

Really great, Haven't measured performance in scenes, But, my load times are so much faster, like 3x faster. I can actually play the game now, more than I spend in loading screen, I wish I saw this when it first released

decent improvements across the board largely to 1% metrics, except for one odd result on the mirror scene.
used the same ini parameters as posted for the 7800X3D, also done the boot.config tweaks.

R7 9800X3D @ 5.4 GHz, RTX 4080S, 48GB (2x24GB) DDR5-6000 CL30

(avg/min1%/max1%)
Overall: 241.66/97.89/309.30 -> 252.22/131.86/457.69 (+4.3%/+34,7%/+48,0%)

posted the screenshots in the discusson topic: [url]https://hub.virtamate.com/threads/cpu-performance-patch-up-to-30-faster-physics-up-to-60-more-fps.49738/post-198482[/url]

Can anyone tell me if it’s normal for odd-numbered cores not to be at 100% load?
But I did get these results:

Size(K) ModuleName FileName
------- ---------- --------
1136 SkinMeshPartDLL.dll E:\v\1.22.0.1\vam1.22.0.1\PerformancePatches\SkinMeshP...


PS E:\v\1.22.0.1\vam1.22.0.1>

We thank you for your service! I love seeing my highest 2 cores being targeted on the 13900k now after adjusting the ini file to utilize just those 2 binned cores.

How to set 9800x3d？

Forgive me to make a second rating but I can't find a way to reply to your reply. Var browser is not a var, it is a bepInEx plugin https://hub.virtamate.com/resources/var-browser.27150/

Your plugin used to work, but since I started using var browser it stopped working. I already updated it to the latest version. This is the output log in which I can't find SkinMeshPartDLL in the log.

UnloadTime: 0.424800 ms
[Message: BepInEx] BepInEx 5.4.23.2 - VaM (12/10/2024 5:41:06 PM)
[Info : BepInEx] Running under Unity v2018.1.9.10931241
[Info : BepInEx] CLR runtime version: 2.0.50727.1433
[Info : BepInEx] Supports SRE: True
[Info : BepInEx] System platform: Bits64, Windows
[Message: BepInEx] Preloader started
[Info : BepInEx] Loaded 1 patcher method from [BepInEx.Preloader 5.4.23.2]
[Info : BepInEx] 1 patcher plugin loaded
[Info : BepInEx] Patching [UnityEngine.CoreModule] with [BepInEx.Chainloader]
[Message: BepInEx] Preloader finished
[Message: BepInEx] Chainloader ready
[Message: BepInEx] Chainloader started
[Info : BepInEx] 1 plugin to load
[Info : BepInEx] Loading [var_browser 0.15]
var browser hook start

Been using Turtlebackgoofy's orig for a while. My benchmarks shows improvement. But the greatest satisfaction I get is seeing the cores of my CPU being pegged. Makes me feel that some of my $$$ spent on my PC is actually being utilized. LOL. I have used Evo's ver successfully with MeshedVR's latest security updated ver.

Doesn't work. No output in powershell. Could it because I'm using var browser?