Hello everyone.
Overview
Concert hall with a simple stage and audience seats.
Seats, stages, etc. are separated for ease of use.
Concept
Created to express the concept of Ayano.
Separated into several structures for ease of use by users.
The seats can be made into tiles and can be expanded as desired by the user.
If I have time, I'm planning to add parts that will allow us to replace the stage and use it as a movie theater.
Package composition
1. subscene: concert_hall
A complete hall with a layout of buildings and seats.
2. concert_hall.assetbundle Consists of 11 prefabs)
2-1.building
Cannot be used if the seat is expanded. A collider is attached only to the floor.
2-2. light_beam
Separate beams for hanging stage lights
2-3/4. seat close/open 10X10
Audience seats that can be laid out with tiling of 100 seats.
You can build a large stage by arranging as many as you like.
Place collider on floor only.
I have prepared an open type with the seats available for use, assuming a situation on the audience side.
Colliders are set only for seats where you can sit.
2-5/6/7/8. seat close/open rh/lh
Seats installed on both sides of 10x10.
Like 10x10, there is an open type that allows you to use the seat.
2-9/10. spot_light 45/60deg
Spotlights, which are essential for stage production, can be used individually.
There are 45deg and 60deg downwards.
In the future, we plan to make it a separate resource along with other props.
2-11. stage
A simple stage.
It is separated so that it can be used alone when the seats or hall are not needed.
A collider is set only on the floor.
Enjoy!
Overview
Concert hall with a simple stage and audience seats.
Seats, stages, etc. are separated for ease of use.
Concept
Created to express the concept of Ayano.
Separated into several structures for ease of use by users.
The seats can be made into tiles and can be expanded as desired by the user.
If I have time, I'm planning to add parts that will allow us to replace the stage and use it as a movie theater.
Package composition
1. subscene: concert_hall
A complete hall with a layout of buildings and seats.
2. concert_hall.assetbundle Consists of 11 prefabs)
2-1.building
Cannot be used if the seat is expanded. A collider is attached only to the floor.
2-2. light_beam
Separate beams for hanging stage lights
2-3/4. seat close/open 10X10
Audience seats that can be laid out with tiling of 100 seats.
You can build a large stage by arranging as many as you like.
Place collider on floor only.
I have prepared an open type with the seats available for use, assuming a situation on the audience side.
Colliders are set only for seats where you can sit.
2-5/6/7/8. seat close/open rh/lh
Seats installed on both sides of 10x10.
Like 10x10, there is an open type that allows you to use the seat.
2-9/10. spot_light 45/60deg
Spotlights, which are essential for stage production, can be used individually.
There are 45deg and 60deg downwards.
In the future, we plan to make it a separate resource along with other props.
2-11. stage
A simple stage.
It is separated so that it can be used alone when the seats or hall are not needed.
A collider is set only on the floor.
Enjoy!
