Plugins + Scripts SexyFluids

[Femcore]

Hi, thanks for that great plugin. Already wrote a review but thought it might be good to mention a suggestion also here:
I would love to have more than 10 presets to choose from or the option to load a saved preset with trigger. I know, changing between the 10 available is possible with trigger, but they are just not enough for me.

 

[duration]

Possibly yep. Thought about it later, forgot to post. Ye olde me... But I don't think it can result in this kind of nonsense, even the worst cubemaps

@duration Current SexyFluids version only approximate the scene lighting. Among other things, it uses VAM's reflection cubemap, but always at its full strength, it does not respect the various sliders. Especially if you have the Scene Lighting set to one of the SkyChinaTown cubemaps, those have bright orange/reddish reflections. If that's the case, try switching it to a different cubemap, or reduce the fluid's Reflectiveness (on all three Spray, Stream and Cumstain tabs)

@Foost: well, I tried a bit fiddling around with CudeMaps changing, as well as reduction of the fluid reflectivness(Spray, Steam, Cumstain etc), nothing helps so far, still red stains ain't gone anywhere. Here below attached my scene files(both json+jpg).

Additionally for the scene to be working well, here you might need to have also this Dependancies to download:
1. Original Scene, by WeebU (most probably you will need both - Scene &dependacies)

Futa Self suck - Scenes -

Scene with 2 poses, speed control and simple climax.

hub.virtamate.com

2. Cute Tranny by SplineVR

Serena TS - Paid Looks -

Male gen morph by ICannotDie Robyn 9

hub.virtamate.com

@Foost: in case of any difficulties with any dependancies, please p.m. me, if anything

@Foost: Also I perhaps forgot to mention, ==> I'm still having SexyFluids the very very first version installed(didn't try any of the latest releases just yet), do you think it might be possible that exactly it could be causing the red-stains issue?

 

[Foost]

@Foost: well, I tried a bit fiddling around with CudeMaps changing, as well as reduction of the fluid reflectivness(Spray, Steam, Cumstain etc), nothing helps so far, still red stains ain't gone anywhere. Here below attached my scene files(both json+jpg).

Additionally for the scene to be working well, here you might need to have also this Dependancies to download:
1. Original Scene, by WeebU (most probably you will need both - Scene &dependacies)

Futa Self suck - Scenes -

Scene with 2 poses, speed control and simple climax.

hub.virtamate.com

2. Cute Tranny by SplineVR

Serena TS - Paid Looks -

Male gen morph by ICannotDie Robyn 9

hub.virtamate.com

@Foost: in case of any difficulties with any dependancies, please p.m. me, if anything

@Foost: Also I perhaps forgot to mention, ==> I'm still having SexyFluids the very very first version installed(didn't try any of the latest releases just yet), do you think it might be possible that exactly it could be causing the red-stains issue?

Unfortunately, I can't reproduce the issue, the cum is all white when I test the scene. I am not using the linked character model since it's paid though, just a default one. I am not sure how that would make any difference.

I would say definitely upgrade, v1 is ancient and I don't even remember how much things have changed since then. BUT, the latest version has the issue where the VAM's glow makes a blurry copy of all fluids visible through any geometry. I am surprised v1 does not have that tbh... But please check if the latest version fixes the reddish color for you at least.

On a slightly related not, what GPU do you have?

 

[faaipdeoiad]

BUT, the latest version has the issue where the VAM's glow makes a blurry copy of all fluids visible through any geometry.

FWIW, MacGruber's PostMagic Bloom does not cause this problem, and it's nicer looking and more configurable than VaM's built-in glow effect

 

[duration]

Unfortunately, I can't reproduce the issue, the cum is all white when I test the scene. I am not using the linked character model since it's paid though, just a default one. I am not sure how that would make any difference.

I would say definitely upgrade, v1 is ancient and I don't even remember how much things have changed since then. BUT, the latest version has the issue where the VAM's glow makes a blurry copy of all fluids visible through any geometry. I am surprised v1 does not have that tbh... But please check if the latest version fixes the reddish color for you at least.

On a slightly related not, what GPU do you have?

@Foost: I have Gigabyte gtx 760 windforce 3x oc 4gb.

https://www.gigabyte.com/Graphics-Card/GV-N760OC-4GD-rev10-11

It's not that I have these red spots like in every scene, just in some scenes only, while for other scenes cum is as white as one can get, actually. So in some scenes cum is red, but in others is white, it's like 50/50. If only I could know what actually causes it.

 

[Femcore]

Hi, thanks for that great plugin. Already wrote a review but thought it might be good to mention a suggestion also here:
I would love to have more than 10 presets to choose from or the option to load a saved preset with trigger. I know, changing between the 10 available is possible with trigger, but they are just not enough for me.

I found the Presets number in the code and changed it from 10 to 50. That should cover all my needs.
But of course, it would be great to have this in the official version as well. Maybe you could adjust it too?

 

[Foost]

@Foost: I have Gigabyte gtx 760 windforce 3x oc 4gb.

https://www.gigabyte.com/Graphics-Card/GV-N760OC-4GD-rev10-11

It's not that I have these red spots like in every scene, just in some scenes only, while for other scenes cum is as white as one can get, actually. So in some scenes cum is red, but in others is white, it's like 50/50. If only I could know what actually causes it.

That's pretty old, I am surprised VAM runs decently on it at all. I might be doing something in the shaders that the GPU does not like. It's hard to tell, I don't have nvidias of that age around here to be able to test. I am a bit scared what the next update will do to it, the updated lighting and shaders will be quite a bit more complex

 

[Foost]

I found the Presets number in the code and changed it from 10 to 50. That should cover all my needs.
But of course, it would be great to have this in the official version as well. Maybe you could adjust it too?

I'll bump it if I remember. But probably to 20 max, not 50, I hope it will be enough. The longer dropdown boxes are such a pain to scroll through when in VR
Be aware that the next version's presets will be mostly incompatible, too many changes in the shaders and parameters. So do not get attached to your current ones, sorry about that!

 

[duration]

That's pretty old, I am surprised VAM runs decently on it at all. I might be doing something in the shaders that the GPU does not like. It's hard to tell, I don't have nvidias of that age around here to be able to test. I am a bit scared what the next update will do to it, the updated lighting and shaders will be quite a bit more complex

@Foost: ya man, VAM runs alright, even when having Oculus Rift attached(but non heavy scenes, of course), other than that, honestly, never complained, although, having now this small interesting 'red spots' effects sometimes, but just only in a few scenes, whereas in the rest of the scenes cum is as white as one can get

Would be interesting to see if next update could be bringing any changes dude

 

[Femcore]

I'll bump it if I remember. But probably to 20 max, not 50, I hope it will be enough. The longer dropdown boxes are such a pain to scroll through when in VR
Be aware that the next version's presets will be mostly incompatible, too many changes in the shaders and parameters. So do not get attached to your current ones, sorry about that!

I totally get that it’s not ideal for VR. 20 sounds like a reasonable compromise.
If possible, adding the option to load a preset via trigger could make it feel less like a hard limit and more like something users can work around.

Either way, thanks for your effort! I’m looking forward to seeing what you’re cooking up.

 

[DimaS]

Do you plan to add a creampie feature?

 

[Luminex666]

I love this plugin! Is there a way to add an option were the fluid doesnt look iluminated all the time? I use alot of darkness and shadows in my scenes. The fluid looks like its all lighten up all the time. Would it be viable to add something like a global ilumination filter on the fluid? So it reacts to the ambience lights? Cheers!

 

[faaipdeoiad]

Found a workaround to the glowing semen issue: just make it a rave!

 

[Foost]

I love this plugin! Is there a way to add an option were the fluid doesnt look iluminated all the time? I use alot of darkness and shadows in my scenes. The fluid looks like its all lighten up all the time. Would it be viable to add something like a global ilumination filter on the fluid? So it reacts to the ambience lights? Cheers!

Complete rewrite of the shaders is currently in progress, which will include proper lighting from VAM's lights (global and local). In the released version the only option is to reduce the cumstain color's brightness to match your scene's lighting.

 

[Foost]

Do you plan to add a creampie feature?

I'd love to, one day. But not just as a hack for creampies, but as a more complex and generic fluids-vs-skin simulation. Which will take time. And no guarantees it will ever work.

 

[Foost]

A little preview of the new lighting in action. I've been working on this for quite a while already, but it's not yet ready for release. Shaders/lighting is not the only part I am changing, the scope of the new update is becoming a bit silly. And also it's summer and vacation time, I did not have much time for anything VAM-related in the past month.