Scenes Pleasure Room

[Hikaru123]

I think I found a solution for next update to make VR and desktop work in same scene.

I change poses via plugin. It's inconvenient, of course, but... the scene is great.!!! I hope for an update.

 

[pingox]

If you fix the pose buttons to a wall, for example, it might work.
In the VR environment, anything floating in the eye or camera view works badly. For example, there are several scenes out there, even recent ones, that have 3 or 4 buttons that appear in the top left corner. In VR these buttons are very difficult to use. In VR you realise there's something there, but you can't even read the content...

 

[Virtamales]

Hi! Nice scene! I'm tweaking some stuff in order to make a gay version of it, and I'm trying to move or rotate some body parts (mostly the heads), but I can't. I've seen that the AutoFocusPoint is linked to the Fem head... Could you please advise what could I do in order to rotate heads and retouch some poses? Thank you!

 

[MrOrange]

MrOrange updated Pleasure Room with a new update entry:

Fixes and stuff

Added/fixed:

• Scene should now be shown ingame in hub browser (hopefully)
• Added new UI options depending on your playstyle (Desktop mode / VR),
• 3 new handjob poses.
• Fixed male gaze plugin.
• Added new UI button to adjust your default female,
• scene now works quite well in VR (for me atleast, hopefully for you too),
• Tweaked male embody...

Read the rest of this update entry...

 

[MrOrange]

Hi! Nice scene! I'm tweaking some stuff in order to make a gay version of it, and I'm trying to move or rotate some body parts (mostly the heads), but I can't. I've seen that the AutoFocusPoint is linked to the Fem head... Could you please advise what could I do in order to rotate heads and retouch some poses? Thank you!

Thanks! Please take a look at the plugin bodylanguage and how it works, that is actually what controls the poses.
The autofocuspoint is linked to the female because it is using the plugin "Focus".

 

[MrOrange]

If you fix the pose buttons to a wall, for example, it might work.
In the VR environment, anything floating in the eye or camera view works badly. For example, there are several scenes out there, even recent ones, that have 3 or 4 buttons that appear in the top left corner. In VR these buttons are very difficult to use. In VR you realise there's something there, but you can't even read the content...

Just posted an update, scene uses VR Canvas now!

 

[yellowsnake]

Still unable to see a pose menu in VR, even with VR canvas enabled. VR canvas only gives me settings options, but no pose menu.

I agree with the other user on putting a static pose menu on the wall. Either that or have it appended to the VAM menu UI where it appears and can be placed where the UI was opened.

 

[MrOrange]

Still unable to see a pose menu in VR, even with VR canvas enabled. VR canvas only gives me settings options, but no pose menu.

I agree with the other user on putting a static pose menu on the wall. Either that or have it appended to the VAM menu UI where it appears and can be placed where the UI was opened.

Just tested again, works for me. Quest 2 here. Do not press F1 (The keybinds are only for Desktop mode).
Load the Scene in VR and press VR Canvas Button in the scene first thing to show Pose UI on the wall.

 

[mlbloom]

Can anyone tell me how you acturally get the scene to start. There is no start button in any of the menu listings. I've clicked on everything and still no way to start the scene. I've been using VaM since it first launched and this is so frustrating. I'm using vr. I will now try to see if there is a way to start the animation in desktop mode.

 

[mlbloom]

MrOrange submitted a new resource:

Pleasure Room - Scene with lots of poses and custom UI



Read more about this resource...

I know you spent a lot of time on this project. I'm an experienced VaM user of over 5 years of daily use. I could not get the program to work in VR or Desktop. In vr, there was no way to start the animation. No pose menu; just two models, one on the bed and one standing. I could bring up all the menus but nothing let me start the animation or scene activity. Couldn't find any menu with poses. Maybe it's the poses that are suppose to start the animation. So I then tried in Desktop. Couldn't bring up the pose menu with the F1 button and couldn't start the scene there either. I'm using an MSI Raider GE76 with 3070 GPU. I also use the JayJay Won BA Assist plugin, but that shouldn't affect the running of the scene. Any suggestions?

 

[MrOrange]

I know you spent a lot of time on this project. I'm an experienced VaM user of over 5 years of daily use. I could not get the program to work in VR or Desktop. In vr, there was no way to start the animation. No pose menu; just two models, one on the bed and one standing. I could bring up all the menus but nothing let me start the animation or scene activity. Couldn't find any menu with poses. Maybe it's the poses that are suppose to start the animation. So I then tried in Desktop. Couldn't bring up the pose menu with the F1 button and couldn't start the scene there either. I'm using an MSI Raider GE76 with 3070 GPU. I also use the JayJay Won BA Assist plugin, but that shouldn't affect the running of the scene. Any suggestions?

When you start the scene in desktop mode, there is a UI button for desktop mode in the scene to the right of the bed "Hud Canvas on".
Did you press it? The Pose UI should be visible then. Do you have all dependencies?

 

[yellowsnake]

Just tested again, works for me. Quest 2 here. Do not press F1 (The keybinds are only for Desktop mode).
Load the Scene in VR and press VR Canvas Button in the scene first thing to show Pose UI on the wall.

It just doesn't work for me. I can't tell you why. Alternative static pose menu would be best for those of us in VR having issues. When I use VR I use Virtual Desktop and load VAM through that in VR and load everything in VR. The VR Canvas button does not expose the poses.

Quest 3 / RX 6800 XT / Ryzen 7 7700x / 32GB RAM / 1TB m.2 SSD

This is kind of a crappy screenshot of a screenshot (Meta makes it hard af to just send screenshots to your PC), but this is what I see in VR when I enable VR Canvas. No pose menu anywhere in the room. All dependencies fully updated.

 

[MrOrange]

It just doesn't work for me. I can't tell you why. Alternative static pose menu would be best for those of us in VR having issues. When I use VR I use Virtual Desktop and load VAM through that in VR and load everything in VR. The VR Canvas button does not expose the poses.

Quest 3 / RX 6800 XT / Ryzen 7 7700x / 32GB RAM / 1TB m.2 SSD

This is kind of a crappy screenshot of a screenshot (Meta makes it hard af to just send screenshots to your PC), but this is what I see in VR when I enable VR Canvas. No pose menu anywhere in the room. All dependencies fully updated.

View attachment 531218

Hmmh..the only clear difference right now to me is you using virtual desktop and me just using meta link. Maybe do a test and use meta link instead of virtual desktop and start VAM with the open VR. bat.

My bat looks like this:
START "VaM" VaM.exe -vrmode oculus


I used the VR Guide on the hub.

Ultimate VR Performance Guide for VAM - Guides -

Welcome to the Ultimate VR Performance Guide, this is a list of performance increasing tips and tricks I have accumulated over the years What is this? It is a list of methods to launch to increase your VR performance. VR is not well optimized in...

hub.virtamate.com

 

[yellowsnake]

Hmmh..the only clear difference right now to me is you using virtual desktop and me just using meta link. Maybe do a test and use meta link instead of virtual desktop and start VAM with the open VR. bat.

My bat looks like this:
START "VaM" VaM.exe -vrmode oculus


I used the VR Guide on the hub.

Ultimate VR Performance Guide for VAM - Guides -

Welcome to the Ultimate VR Performance Guide, this is a list of performance increasing tips and tricks I have accumulated over the years What is this? It is a list of methods to launch to increase your VR performance. VR is not well optimized in...

hub.virtamate.com

I don't use Meta Quest Link because the quality with regards to bitrate is far inferior to virtual desktop and virtual desktop you can use the Quest wirelessly with high bit rate performance. I have also done previously what that guide suggests for Virtual Desktop.

I don't have this issue with any other scenes in VR.

 

[aesosfan]

Mr Orange. Just DL a couple of days ago. Runs great in DT where I get both or either of the pose menus to come up (or both at the same time). But in VR (Quest 3) cannot get any poses to load no matter how many times I reboot the scene or whatever key combinations I try. Any ideas???? THANKS!

 

[MrOrange]

Mr Orange. Just DL a couple of days ago. Runs great in DT where I get both or either of the pose menus to come up (or both at the same time). But in VR (Quest 3) cannot get any poses to load no matter how many times I reboot the scene or whatever key combinations I try. Any ideas???? THANKS!

Are you using virtual desktop or meta link?

 

[pingox]

I can't do it either.

I use Metalink.

As soon as the scene starts, I see the floating pose buttons, but then when I interact with the scene, they disappear and never reappear.

 

[aesosfan]

Are you using virtual desktop or meta link?

Neither one actually..............run the Quest 3 via my own network WiFi..............I found that the cable link would cause VAM to crash occasionally but under WiFi option it never crashes. Only disadvantage is HOW long I can run cause the batteries are not exactly long lasting in the Quest 3 but I can live with it. Like I said the poses for Desk Top & VR will show up when I use desktop but neither one will show up when I run it in VR...........LOL............

 

[yellowsnake]

I just don't think the issue would be Meta Quest Link vs alternative methods because at the end of the day shouldn't it work regardless of the VR method (Not every VR headset is a Quest headset as well)?

 

[MrOrange]

I just don't think the issue would be Meta Quest Link vs alternative methods because at the end of the day shouldn't it work regardless of the VR method (Not every VR headset is a Quest headset as well)?

Yeah true, just a guess. It seems to work for some it seems (rating) Gonna take another look.

 

[haho]

no pose menu in vr, I tried all versions , pressed all buttons , no luck , can you give us the name of the atom from where we can turn that menu on manually ?