Plugins + Scripts CPU Performance Patch (Up to 30% faster physics, up to 60% more FPS)

[SortaLewd]

Anyone else been experiencing crashes with the newer versions? Just recently updated vam and updated this patch and now my vam crashes every so often whereas it very rarely crashed beforehand on the previous vam version before the security patch and the previous cpu performance patch version..

 

[makojira]

hello. firstly, i want to say that i am an amateur about these kind of things. i have setup a new vam instance since the old instance got me stuck on loading model janie. i managed to get the benchmark to work in the new instance but see no improvement. ive checked with powershell it showed 1136 SkinMeshPartDLL. Also since my CPU isnt listed in the post i set the settings to amd 7800. could anyone help me with this? Thanks!

 

[JC318]

Anyone else been experiencing crashes with the newer versions? Just recently updated vam and updated this patch and now my vam crashes every so often whereas it very rarely crashed beforehand.

Yes, I am actually. Do you have more .dlls in where your VaM.exe is?

 

[SortaLewd]

Yes, I am actually. Do you have more .dlls in where your VaM.exe is?

Only additional dlls I have are for BepInEx and Reshade.

 

[JC318]

Only additional dlls I have are for BepInEx and Reshade.

Dang, was hoping we had the same issue. (Though, I don't recognize those.) For me, even installing this patch on a new copy of VaM causes errors. I figured more people had to have issues with this. By chance, are you using Windows 11 as your OS?

 

[SortaLewd]

Dang, was hoping we had the same issue. (Though, I don't recognize those.) For me, even installing this patch on a new copy of VaM causes errors. I figured more people had to have issues with this. By chance, are you using Windows 11 as your OS?

I'm still on Windows 10

 

[Evo]

Only additional dlls I have are for BepInEx and Reshade.

Search this thread for BepInEx. Related

Anyone else been experiencing crashes with the newer versions? Just recently updated vam and updated this patch and now my vam crashes every so often whereas it very rarely crashed beforehand on the previous vam version before the security patch and the previous cpu performance patch version..

If v13beta1 crashes for you, look at the history and use v12evo. I don't have the bandwidth to figure out why it crashes for some installs and not others.

 

[vamp3003]

Hey guys I am currently on the 7800x3d and a 4080 super.
I have a chance to upgrade to the 9800x3d for basically almost no cost.
I assume not much of an improvement in VAM correct?
Would the 9900x3d or 9950x3d give me more? Or not really since they are dual CCD?
I would also probably get the 5090 shortly so unless any of the 9800/9900/9950 helps with that is there a point in upgrading cpu?

 

[poopsecks]

Should "Desktop" and "VR" CPU optimizations be the same? My Quest 3 is coming in tomorrow and I just wanted to make sure there wasn't anything special i needed to do to the ini file as i just copied and pasted the same settings for the VR sections:

Here is what mine looks like if anyone is curious: It is for my 13900k CPU with the hyperthreading turned off, and according to my bio's my core 5 and 6 are my highest binned cores with the highest frequency so that is why i have the engine physics running on 5 and 6:
Please let me know if iam missing anything important or if there is something I should adjust differently:

[threads]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
#affinity=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24
affinity=1,2,3,4,5,6,7,8
engineAffinity=5,6

[threadsVR]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
affinity=1,2,3,4,5,6,7,8
engineAffinity=5,6
[profiler]
enabled=0

 

[vamp3003]

I am assuming this is fine for the 9800x3d? Was using it with the 7800x3d so they are very similar and one CCD.

[threads]
computeColliders=6
skinmeshPart=6
skinmeshPartMaxPerChar=6
applyMorphs=6
applyMorphMaxPerChar=6
#affinity=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
affinity=1,3,5,7,9,11,13,15
#engineAffinity=1,3

[threadsVR]
computeColliders=6
skinmeshPart=6
skinmeshPartMaxPerChar=6
applyMorphs=6
applyMorphMaxPerChar=6
affinity=1,3,5,7,9,11,13,15
#engineAffinity=1,3
[profiler]
enabled=0

 

[Seraphim]

hello. firstly, i want to say that i am an amateur about these kind of things. i have setup a new vam instance since the old instance got me stuck on loading model janie. i managed to get the benchmark to work in the new instance but see no improvement. ive checked with powershell it showed 1136 SkinMeshPartDLL. Also since my CPU isnt listed in the post i set the settings to amd 7800. could anyone help me with this? Thanks!

You were gpu bottlenecked in both instances. cpu cant do more because of it. (0.00 wait times)

 

[poopsecks]

i9-13900k + 7900xtx results:
(avg/min1%/max1%)
Patch HT-ON: 112.14/69.06/263.62
No-Patch HT-ON: 112.59/68.67/230.32
Patch HT-OFF: 112.30/69.30/268.16
No-Patch HT-OFF: 111.79/68.11/212.83

Screenshots of full results:
Patch HT-ON:

No-Patch HT-ON:

Patch HT-OFF:

No-Patch HT-OFF:


Here are my ini's; please let me know if there is something in there I should change to make it run better:
HT-ON ini:

Spoiler: HT-ON ini

[threads]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
#affinity=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
affinity=1,3,5,7,9,11,13,15
engineAffinity=9,11

[threadsVR]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
#affinity=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
affinity=1,3,5,7,9,11,13,15
engineAffinity=9,11
[profiler]
enabled=0

HT-OFF ini:

Spoiler: HT-OFF ini:

[threads]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
#affinity=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24
affinity=1,2,3,4,5,6,7,8
engineAffinity=5,6

[threadsVR]
computeColliders=8
skinmeshPart=8
skinmeshPartMaxPerChar=8
applyMorphs=8
applyMorphMaxPerChar=8
affinity=1,2,3,4,5,6,7,8
engineAffinity=5,6
[profiler]
enabled=0