MMD Camera Director is a lightweight camera control plugin designed primarily for MMD dance scenes in Virt-A-Mate.
It provides both automatic camera movement and manual camera direction using the NumPad.
No SubScene or additional atoms are required.
Simply add the plugin to a Person atom and start shooting.
FEATURES
• Orbit and Random Roam automatic camera modes
• Front Only / Front + Sides / Full 360 camera coverage
• Face / Chest / Hip auto camera targets
• Smooth camera and target following
• Manual camera shots using NumPad 1-9
• CUT / SMOOTH shot transitions
• Manual character tracking
• NORMAL and SPECIAL shot banks
• Vertical full-body camera
• Extreme top-down and floor-level low-angle shots
• Rear and close-up camera presets
• Flip Front Direction hotkey
• Preset Save / Load
• No SubScene required
• No additional atoms required
NUMPAD CONTROLS
Num 0
Return to Auto Camera / Start-Stop Auto Camera
Num 1-9
Manual Camera Shots
Num .
CUT / SMOOTH Transition
Num /
NORMAL / SPECIAL Shot Bank
Num *
Manual Tracking ON / OFF
Num Enter
Flip Front Direction
Num +
Auto Camera Closer
Num -
Auto Camera Farther
NORMAL SHOT BANK
7 / 8 / 9
Face Close-up - Left / Front / Right
4 / 5 / 6
Upper Body - Left / Front / Right
1 / 2 / 3
Full Body Low Angle - Left / Front / Right
SPECIAL SHOT BANK
1 - Rear Full Body
2 - Hip Close-up
3 - Rear Medium Shot
4 - Chest Close-up
5 - Extreme Face Close-up
6 - Diagonal Face Close-up
7 - Extreme Top-Down View
8 - Vertical Full-Body Camera
9 - Floor-Level Low Angle
MANUAL TRACKING
Enable Manual Tracking with NumPad *.
When tracking is enabled, the selected manual shot follows the character while maintaining the camera composition.
Camera vertical movement is stabilized to reduce excessive bouncing during MMD animations.
PRESETS
Camera settings can be saved and loaded from the plugin UI.
You can create different presets for different MMD scenes, stages or camera styles.
INSTALLATION
1. Install the VAR normally.
2. Select your Person atom.
3. Open Plugins.
4. Add EG MMD Camera Director.
5. Use the plugin UI or NumPad hotkeys.
Created by EG
License: CC BY
Free to use, modify and redistribute with credit to the original creator.
It provides both automatic camera movement and manual camera direction using the NumPad.
No SubScene or additional atoms are required.
Simply add the plugin to a Person atom and start shooting.
FEATURES
• Orbit and Random Roam automatic camera modes
• Front Only / Front + Sides / Full 360 camera coverage
• Face / Chest / Hip auto camera targets
• Smooth camera and target following
• Manual camera shots using NumPad 1-9
• CUT / SMOOTH shot transitions
• Manual character tracking
• NORMAL and SPECIAL shot banks
• Vertical full-body camera
• Extreme top-down and floor-level low-angle shots
• Rear and close-up camera presets
• Flip Front Direction hotkey
• Preset Save / Load
• No SubScene required
• No additional atoms required
NUMPAD CONTROLS
Num 0
Return to Auto Camera / Start-Stop Auto Camera
Num 1-9
Manual Camera Shots
Num .
CUT / SMOOTH Transition
Num /
NORMAL / SPECIAL Shot Bank
Num *
Manual Tracking ON / OFF
Num Enter
Flip Front Direction
Num +
Auto Camera Closer
Num -
Auto Camera Farther
NORMAL SHOT BANK
7 / 8 / 9
Face Close-up - Left / Front / Right
4 / 5 / 6
Upper Body - Left / Front / Right
1 / 2 / 3
Full Body Low Angle - Left / Front / Right
SPECIAL SHOT BANK
1 - Rear Full Body
2 - Hip Close-up
3 - Rear Medium Shot
4 - Chest Close-up
5 - Extreme Face Close-up
6 - Diagonal Face Close-up
7 - Extreme Top-Down View
8 - Vertical Full-Body Camera
9 - Floor-Level Low Angle
MANUAL TRACKING
Enable Manual Tracking with NumPad *.
When tracking is enabled, the selected manual shot follows the character while maintaining the camera composition.
Camera vertical movement is stabilized to reduce excessive bouncing during MMD animations.
PRESETS
Camera settings can be saved and loaded from the plugin UI.
You can create different presets for different MMD scenes, stages or camera styles.
INSTALLATION
1. Install the VAR normally.
2. Select your Person atom.
3. Open Plugins.
4. Add EG MMD Camera Director.
5. Use the plugin UI or NumPad hotkeys.
Created by EG
License: CC BY
Free to use, modify and redistribute with credit to the original creator.
