Plugins + Scripts CPU Performance Patch (Up to 30% faster physics, up to 60% more FPS)

5800X3D + 6900 XT + 32 GB of RAM, dedicated SSD for VAM, Clean VAM install

2558*1206 @ 120 Hz Windowed mode
Did all CPU specific settings and all recommended settings

Before:
-Overall: 96,44 FPS Avg, 40,13 FPS Min, 176,59 FPS Max
-Baseline1: 113,34, 89,98, 141,13
-Cloth: 108,34, 81,38, 138,72
-Mirror: 65,46, 40,13, 75,54
-Baseline2: 118,33, 91,59, 156,85
-HairSim: 126,95, 87,37, 176,59
-Baseline3: 70,83, 43,46, 83,37
-Simpler Physics: 71,86, 40,79, 85,75

After:
-Overall: 92,68 FPS Avg, 24,07 FPS Min, 171,93 FPS Max - 3% drop in avg, massive drop in 1% low
-Baseline1: 113,44, 89,25, 144,96 - no change
-Cloth: 106,30, 33,69, 144,37 - massive drop in 1% low
-Mirror: 60,02, 29,12, 75,72 - 10% drop in avg
-Baseline2: 118,21, 93,48, 155,27 - no change
-HairSim: 127,13, 94,93, 171,93 - no change, bit better 1% low
-Baseline3: 60,60, 29,35, 85,59 - 15% loss in avg and 25% loss in 1% low
-Simpler Physics: 63,04, 24,07, 83,21 - 15% loss in avg and 40% loss in 1% low

Conclusion: this patch hurts the performance of my system.

If you need more data, I will gladly share it.

great performance boost on 9800x3d

Still testing the new 'patched12evo' update for VaM 1.22.0.12.
So far it's looking good.
Hope it ends up in featured resources if there are no problems found.

Thanks Evo for the update and turtlebackgoofy - the og creator!

0% boost

I need some help the plugin copletyl broke my Vam even after reinstalling i am forever stuck in scene load and nothing is happening any ideas how to fix it ? I removed all the files change the boot config back to the original and still nothing vam turns on i can see all the scenes i got all the plugins work as well but when I try to load scenes nothing forever stuck...

Night and day difference! atleast for for my PC with these specs:

Intel 13900k 64GB RAM
7900xtx 24GB VRAM

- No significant improvement using MacGruber's Benchmark in VR...

...

...Not that I expected there would be.

Ryzen 9900X
96GB VRAM
RTX4090
Bigscreen Beyond in SteamVR

Before: 55.16 Avg | 29.42 Min | 98.09 Max
After : 58.33 Avg | 29.88 Min | 96.15 Max

I mean, it is 5.8% better on average, but that's not really enough to be noticeable.

All you really need to make this free plugin 100% worth every cent you paid for it ($0.00) is just a hair under $4000 in various upgrades spread out over something like 2.5 years.


Honestly, I wasn't sure how much it would actually help incredibly demanding code from 2019 run on top shelf hardware (at least until CES next week, when the RTX 5000s finally are officially revealed), but, hey - 6% is 6%, and reading the other reviews says that the boost on other hardware is pretty impressive - so 5 Stars from me!

Must have

Work great (though I still have intermittent big stutters in some scenes)

Can you update to 1.22.0.7 ?

Tested and work well for 1.22.03, does this also support 1.22.07?

RTX 2060, AMD Ryzen 7 4800H - ASUS Tuf Gaming Laptop FA 506IV + 64GB RAM + Prismxr + virtual desktop + Meta Quest 3
IF YOURE READING THIS DO THE THING!!! #1 Singlehandedly solved my pc's severe crashing problem with vam #2 QUICK load times #3 MUCHH LESS having to restart vam after having run many different scenes #4 MUCH LESS Freezing inbetween plugin confirmations and scene-loads which is a godsend when youre in VR, #5 Actually really easy once you do it and understand what you did, (I used chatgpt to recommend me what to write in the DLL based off of my pc specs and luckily it was clearly correct and maybe it could even get BETTER who knows) I also keep a backup folder of all the edited stuff like the dll and the actual patch download folder thing incase I want to repair vam and then all i have to do is copy and paste the folders to vam and done, wont have to edit anything again after repairs.

5800x3d
baseline.bat
from 226 to 330 holy

Hey, 5950x gang here. Paired up with a RTX 4080.
Didn't use the official Benchmark but did a controlled benchmark with my own scenes for my own use case scenarios.

The scene that already had around 160~180 fps before the patch
jumped up to 284 average fps. Nearly a 70% increase.

What blew me away was the second scene that I didn't really expected much because usually something less than a 100 fps is mainly a GPU bottleneck instead of the CPU.
But the second scene with a lot more rigid body physics and clothing sim involved, jumped from 65~85 fps to 180 fps average.
140%???? It's insane how under utilized my 16 core CPU were all this time.

I rarely post reviews online. Thank you so much for this.

super tips my friend!!! ty

AMD Ryzen 7 Series

Noticable boost for smoother scenes, ty!

Went from 40 to 50 fps in a physics heavy scene, exactly that extra boost i needed.

If your character not able to load after patch with error
Exception during Restore of geometry: System.MissingFieldException: Field '.DAZMorph.appliedValue' not found.
It's cause by the plugins under \BepInEx\plugins\ , in my case, fridadexdump.dll is the problem.
I don't know what is it and i didn't have any issue so far after removing it

gain around 60-70fps after patch with i7-13700k+4080

Does anyone know how to adjust i9 13900HK？

Hello genius, I want to know if my loser's eye notebook 14900 processor with 4090 can be used,

Too Many Heap Sections Error during Scene load
Specs: RTX4090, i9 13900k
Vam Specs: 2TB of content, caching disabled

What I've tried so far:
limiting how many threads used to only 6 or 4, still the same error

What I've noticed:
Memory gets filled very fast, not slow and steady increase and then vam crashes