Plugins + Scripts SexyFluids

duration · Apr 29, 2025

Foost said:
Yes you should always load the BodyLanguage plugin on the female atom. But it will also handle males and (builtin) dildos in the scene. See the overview page of this plugin, at the bottom the documentation shows how to configure BL triggers for male/altfuta orgasm. However, afaik you can't bind shortcuts for individual males in the scene, just Q (by default) to make them cum all.

yep, just Q, but it suits just fine

.

Another thing, usually, in order for Boobs to start lactating, I click on the Female atom, then I go into plugins, then I open SexyFluids plugin, then I click on Left Nipple(or Right Nipple), then I click on "Milk" and then I press "Load Presets" and finally, I press "Start Endless" and Boobs start lactating(with Loaded presets, which I pre-configured and saved earlier). Interestingly, I noticed that for every Scene(or every occasion I start a Scene I already saved a while ago, having there a Female atom, with SexyFluids plugin pre-configured), I now would again have to manualy "switch On" the lactation again(meaning, again clicking on the Female atom, then I go into plugins, and then I open SexyFluids plugin, click on Left Nipple or Right Nipple, then I click on "Milk" and then I load Presets and finally I press "Start Endless" and Boobs finally start lactating).

Is there, by any chance, the way of having Boobs, becoming already lactating automatically(with the presets, which have already been chosen and saved already once), immediately when the Scene starts(just enough to configure and save everything once)? Instead of every time, after scene got loaded, manually clicking on the Female atom, and start all manually one more time again, when loading already saved scene anew ?

Just curious.

Because, I noticed, that, every time I restart the saved milk scene, lactation does not start(I have to jump in Female atom plugins, and start everything anew).

Thank you man, for a such beautiful work, you already have done for all of us, bringing Milkies to life

Foost · Apr 29, 2025

duration said:
yep, just Q, but it suits just fine .

Another thing, usually, in order for Boobs to start lactating, I click on the Female atom, then I go into plugins, then I open SexyFluids plugin, then I click on Left Nipple(or Right Nipple), then I click on "Milk" and then I press "Load Presets" and finally, I press "Start Endless" and Boobs start lactating(with Loaded presets, which I pre-configured and saved earlier). Interestingly, I noticed that for every Scene(or every occasion I start a Scene I already saved a while ago, having there a Female atom, with SexyFluids plugin pre-configured), I now would again have to manualy "switch On" the lactation again(meaning, again clicking on the Female atom, then I go into plugins, and then I open SexyFluids plugin, click on Left Nipple or Right Nipple, then I click on "Milk" and then I load Presets and finally I press "Start Endless" and Boobs finally start lactating).

Is there, by any chance, the way of having Boobs, becoming already lactating automatically(with the presets, which have already been chosen and saved already once), immediately when the Scene starts(just enough to configure and save everything once)? Instead of every time, after scene got loaded, manually clicking on the Female atom, and start all manually one more time again, when loading already saved scene anew ? Just curious.

Because, I noticed, that, every time I restart the saved milk scene, lactation does not start(I have to jump in Female atom plugins, and start everything anew).

Thank you man, for a such beautiful work, you already have done for all of us, bringing Milkies to life

Just trigger the appropriate action in any way you want. See Storables and Actions in the documentation for list of available triggers - the examples used there are for the penis, but same sets exist for squirt/lnipple/rnipple. How you run the triggers depends entirely on how your scene is set up. If you use Timeline, just trigger it from there. If you use BodyLanguage's Poses, use its Actions - On Pose Enter triggers. Or you can use EventSceneLoad from MacGruber's LogicBricks to trigger actions on scene load.

LeChuck99 · May 1, 2025

This is really an awesome and really the best fluid plugin. Thanks for it so much!
But one small thing. It seems, that it takes the reflection Map of the VAM internal Skybox reflections map, even if the skybox is set off. What means, the color what you want to set, interact with the reflection map and in many case not working. Maybe it is possible to add an custom reflection map or the possibility for load one by user?
Keep up the good work. You are great.

duration · May 1, 2025

Foost said:
Just trigger the appropriate action in any way you want. See Storables and Actions in the documentation for list of available triggers - the examples used there are for the penis, but same sets exist for squirt/lnipple/rnipple. How you run the triggers depends entirely on how your scene is set up. If you use Timeline, just trigger it from there. If you use BodyLanguage's Poses, use its Actions - On Pose Enter triggers. Or you can use EventSceneLoad from MacGruber's LogicBricks to trigger actions on scene load.

"Storables and Actions" you mean for BodyLanguage Documentation?
The thing is, I'm a totalTotal newbie(the most newbie one can actually ever be), opening all tutorials and start digging through all of them(I mean LogicBricks, Timelines and so on), I will start getting myself familiarized with all of that step by step, of course, but it will take many months and besides,I do not use Timelines for my scene(s). My scene is quite simple, just a CustomUnityObject(like some furniture, one large bed,for example) and a Female atom, laying on it and grabbing her tits, that it! Someone,on forum recommended AcidBubbles KeyBindings, for plugins buttons triggering, which most likely will work(if only get to know how), athough I haven't figured out as to how, just yet. AcidBubbles Keybindings did help me a lot with adjusting my wireless XBox360 Joystick controller, which now, all thanx to Keybindings, works like a sharm, in VR.

Still, getting back to my previous question, which is How to trigger "Start Endless" button, from your SexyFluids plugin, remains very much open, for me and I was only wondering if someone could post a screenshot, if there is any quick or easy workaround.

P.s. Sorry folks, do not mean to be pushy or anything, just only so desparate to make Boobs automatically starting lactating(with already pre-saved presets), as soon as the initially saved Scene starts anew, that's it

Foost · May 1, 2025

LeChuck99 said:
This is really an awesome and really the best fluid plugin. Thanks for it so much!
But one small thing. It seems, that it takes the reflection Map of the VAM internal Skybox reflections map, even if the skybox is set off. What means, the color what you want to set, interact with the reflection map and in many case not working. Maybe it is possible to add an custom reflection map or the possibility for load one by user?
Keep up the good work. You are great.

I plan to completely rework the lighting of the fluids at some point in the future, to better match the scene setup: use actual scene lights, take skybox sliders into account, not just the skybox choice. But that will take a while. For now you'll have to tweak the visuals of the fluid particles and cumstains to match your scene:

The Reflectiveness slider controls how much of the VAM's Global Illum Sky skybox reflects. Set it very low or to zero if you do not want to use VAM's skybox for lighting.
The Specular Strength and Shininess control the specular reflections from the virtual light source. For fluids, higher Shininess usually looks better. Turn down the Strength if your scene is darker.
The Diffuse Color controls the fake-ish diffuse lighting. Turn it down if your scene is darker.

Foost · May 1, 2025

duration said:
"Storables and Actions" you mean for BodyLanguage Documentation?
The thing is, I'm a totalTotal newbie(the most newbie one can actually ever be), opening all tutorials and start digging through all of them(I mean LogicBricks, Timelines and so on), I will start getting myself familiarized with all of that step by step, of course, but it will take many months and besides,I do not use Timelines for my scene(s). My scene is quite simple, just a CustomUnityObject(like some furniture, one large bed,for example) and a Female atom, laying on it and grabbing her tits, that it! Someone,on forum recommended AcidBubbles KeyBindings, for plugins buttons triggering, which most likely will work(if only get to know how), athough I haven't figured out as to how, just yet. AcidBubbles Keybindings did help me a lot with adjusting my wireless XBox360 Joystick controller, which now, all thanx to Keybindings, works like a sharm, in VR.

Still, getting back to my previous question, which is How to trigger "Start Endless" button, from your SexyFluids plugin, remains very much open, for me and I was only wondering if someone could post a screenshot, if there is any quick or easy workaround.

P.s. Sorry folks, do not mean to be pushy or anything, just only so desparate to make Boobs automatically starting lactating(with already pre-saved presets), as soon as the initially saved Scene starts anew, that's it

By "Storables and Actions" I mean the SexyFluids documentation section called just that, right on the Overivew tab here on vamhub. Just search for that string, it lists actions implemented by SexyFluids.

But you won't be able to trigger actions from AcidBubbles Keybindings. Those are good for global keybindings, not to trigger something specific to a scene.

If you are just learning the basics, the most simple way to trigger an action in your scene is to add a button to it.

Then add an action to that button:

And configure the action to look something like this:

Target the female atom, it might be called Person in your scene.
The receiver should be the SexyFluids plugin.
And the target is the action you want to trigger. The picture shows a simple milk action on the right nipple. You might want to use startEndless instead.

Once you get more familiar with how this all works, you can then check the LogicBricks plugin and use MacGruber_EventSceneLoad to setup the same kind of action to be triggered on scene load instead of from a button.

LeChuck99 · May 1, 2025

Foost said:
I plan to completely rework the lighting of the fluids at some point in the future, to better match the scene setup: use actual scene lights, take skybox sliders into account, not just the skybox choice. But that will take a while. For now you'll have to tweak the visuals of the fluid particles and cumstains to match your scene:

The Reflectiveness slider controls how much of the VAM's Global Illum Sky skybox reflects. Set it very low or to zero if you do not want to use VAM's skybox for lighting.

The Specular Strength and Shininess control the specular reflections from the virtual light source. For fluids, higher Shininess usually looks better. Turn down the Strength if your scene is darker.

The Diffuse Color controls the fake-ish diffuse lighting. Turn it down if your scene is darker.

I hope it remains in some way compatible with the older versions.

but yah ok, i know how i can fix it with workarounds. This reflections with the VAM builtin skymap stuff is not the first time i saw that it influencing on the reflection of other things. I dont use the original skymap feature of VAM, so i can chose a dark one and then it works. But good to know, that you still working on the plugin and want to update it. Its really the best fluid plugin out there. btw i asked some time ago, for anchoring the plugin on other objects and not only on atoms. Maybe you can also consider to add this feature in your bigger update. thnx and have a nice day.

Foost · May 2, 2025

LeChuck99 said:
I hope it remains in some way compatible with the older versions. but yah ok, i know how i can fix it with workarounds. This reflections with the VAM builtin skymap stuff is not the first time i saw that it influencing on the reflection of other things. I dont use the original skymap feature of VAM, so i can chose a dark one and then it works. But good to know, that you still working on the plugin and want to update it. Its really the best fluid plugin out there. btw i asked some time ago, for anchoring the plugin on other objects and not only on atoms. Maybe you can also consider to add this feature in your bigger update. thnx and have a nice day.

You are certainly not the first, or the last, person that asked me to enable the fluids on empties or the builtin dildo. One day. First focus is on the visuals and functionality, and male/female interactions (where male can also be altfuta or a dildolanguage dildo). I just don't have time to extend the support to other object types until I am happy with the core functionality. Making sure the existing and new features work both on dildolanguage and males/altfutas is enough work already.

duration · Wednesday at 2:17 PM

Foost said:
By "Storables and Actions" I mean the SexyFluids documentation section called just that, right on the Overivew tab here on vamhub. Just search for that string, it lists actions implemented by SexyFluids.

But you won't be able to trigger actions from AcidBubbles Keybindings. Those are good for global keybindings, not to trigger something specific to a scene.

If you are just learning the basics, the most simple way to trigger an action in your scene is to add a button to it.
View attachment 484974

Then add an action to that button:
View attachment 484975

And configure the action to look something like this:
View attachment 484976
Target the female atom, it might be called Person in your scene.
The receiver should be the SexyFluids plugin.
And the target is the action you want to trigger. The picture shows a simple milk action on the right nipple. You might want to use startEndless instead.

Once you get more familiar with how this all works, you can then check the LogicBricks plugin and use MacGruber_EventSceneLoad to setup the same kind of action to be triggered on scene load instead of from a button.

View attachment 484977

interesting, is there any way to attach to that "Milk" button a small mp3 or wav file? For even more impressive lactation?
I bet,it is possible through that greeen "Add Click Action" button, right? if only just to know what else...

Foost · Thursday at 12:27 PM

duration said:
interesting, is there any way to attach to that "Milk" button a small mp3 or wav file? For even more impressive lactation?
I bet,it is possible through that greeen "Add Click Action" button, right? if only just to know what else...

I am pretty sure it's possible, but I don't remember from top of my head how to add custom sounds to a scene. Iirc you have to load them first somewhere in the scene settings, then you can trigger them from anywhere you want.

However, if you use endless burst mode for the nipple emitter, you won't be able to synchronize the sound to the bursts. For that I'd have to add "on burst" triggers to SexyFluids or something along those lines. Maybe I'll do that one day. If you wanted to add sounds to collisions of fluids and scene geometry, that would be even more complicated ; or rather, impossible now, and triggers for fluid collisions is probably not something I'll add, it's hard to define how they should exactly behave.

awfwak · Thursday at 2:17 PM

Its awesome but i would love for the plugin to be applyable to dildos, was sad when i found out it wasnt

Foost · Thursday at 2:20 PM

epic shade said:
Its awesome but i would love for the plugin to be applyable to dildos, was sad when i found out it wasnt

The fluids are built into my DildoLanguage dildos natively, that's where it all started. As for supporting other CUA dildos, that will most likely never happen. The built-in dildo or empty atoms, probably one day, but not high on my priority list.

awfwak · 2025-05-10T02:43:07-0400

Foost said:
The fluids are built into my DildoLanguage dildos natively, that's where it all started. As for supporting other CUA dildos, that will most likely never happen. The built-in dildo or empty atoms, probably one day, but not high on my priority list.

I didnt knew that but thats really cool, being able to apply it to the built in dildos or empty atoms would be awesome too but ur DildoLanguage dildos should do it thanks

LeChuck99 · 2025-05-10T13:18:12-0400

awfwak said:
I didnt knew that but thats really cool, being able to apply it to the built in dildos or empty atoms would be awesome too but ur DildoLanguage dildos should do it thanks

with an empty atom, you could place it where you want. Even on the tip of an dildo or whatever. I think if you use your limited time for this, it would probably be most beneficial for everyone. Anyway, the plugin is always great and the best fluid plugin.

Virtamales · 2025-05-10T14:17:36-0400

LeChuck99 said:
with an empty atom, you could place it where you want. Even on the tip of an dildo or whatever. I think if you use your limited time for this, it would probably be most beneficial for everyone. Anyway, the plugin is always great and the best fluid plugin.

What you just suggested, LeChuck99, or adding an option to disable Dildolanguage's own internal collision, and add to it a transparency option (alpha), so that you can attach/link an invisible dildo to a person's mouth, a soap dispenser, or whatever you can think of... It'd be much better, but both SexyFluids and DildoLanguage are already great, we can be patient...

RonBurgundy · 2025-05-11T03:09:59-0400

@Foost
Wow this is awesome! i've been following your work on the DL in Cheesy's discord. This plugin makes squirting SO EASY compared to any other that I've seen.
I was messing around and THINKING about using the "Drip" function as a Creampie aftermath, but the settings seem shared with all of the other types from the same orifice.
Would also like to do a "cumflation" type effect with TONS of fluids coming out.

Do you have any suggestions how to do something like this?
I haven't tried but could i load a second version of the plugin on the same Look and make it more white and viscous?

LeChuck99 · 2025-05-11T04:15:27-0400

Virtamales said:
What you just suggested, LeChuck99, or adding an option to disable Dildolanguage's own internal collision, and add to it a transparency option (alpha), so that you can attach/link an invisible dildo to a person's mouth, a soap dispenser, or whatever you can think of... It'd be much better, but both SexyFluids and DildoLanguage are already great, we can be patient...

OMG. I am so stupid. lol since everything from the fluid plugin is inside the dildo plugin, you can us it like an empty atom. Scale the dildo down until you dont see it, use the collision manager plugin for ignore collisions with whatever you want and chain it with whatever you want.
I think, there is really no need to invest any time onto add it to an empty atom.

Virtamales · 2025-05-11T07:36:44-0400

LeChuck99 said:
OMG. I am so stupid. lol since everything from the fluid plugin is inside the dildo plugin, you can us it like an empty atom. Scale the dildo down until you dont see it, use the collision manager plugin for ignore collisions with whatever you want and chain it with whatever you want.
I think, there is really no need to invest any time onto add it to an empty atom.

Have you thied that already? I tried scaling down a DildoLanguage toy, but I noticed that when you make it so tiny, it starts to collide with itself and starts to quiver, so I feared that could cause a collision explosion later... Besides, I didn't realize that one could use the collision manager plug-in to try disabling Dildolanguage toys collision.... Could we really do that? I'm asking beacuse they have their own collision provided by it's own asset or plug-in... If you try that, please let us know, buddy!

shidyhartha · 2025-05-11T07:39:37-0400

I would like to use only the "drip" function of this plugin on the female. I can't seem to figure it out. Is it possible? Would it be possible to create such feature in this plugin so that I can either trigger only the drip? I would like to simulate that after the male atom cums in the female, she starts to "leak" and drip all the cum.

Foost · 2025-05-11T08:10:44-0400

Virtamales said:
Have you thied that already? I tried scaling down a DildoLanguage toy, but I noticed that when you make it so tiny, it starts to collide with itself and starts to quiver, so I feared that could cause a collision explosion later... Besides, I didn't realize that one could use the collision manager plug-in to try disabling Dildolanguage toys collision.... Could we really do that? I'm asking beacuse they have their own collision provided by it's own asset or plug-in... If you try that, please let us know, buddy!

You don't have to make the dildo super tiny. You can hide the visual on the Visuals - Render Mode tab. Set the Alpha to zero. It's a possible workaround and I actually used it in one of my personal scenes.

Maybe I should prioritize the empty atom support. But at the same time, I am a stubborn fool and I'd much rather implement other stuff first, such as more native support for emitters from mouth/vagina/other body parts, based on actual visual geometry shape. Before people start attaching empties to all kinds of places, with all the issues the VAM's parenting brings.

Foost · 2025-05-11T08:35:52-0400

shidyhartha said:
I would like to use only the "drip" function of this plugin on the female. I can't seem to figure it out. Is it possible? Would it be possible to create such feature in this plugin so that I can either trigger only the drip? I would like to simulate that after the male atom cums in the female, she starts to "leak" and drip all the cum.

Most likely yes, depends on what kind of visual effect you want to achieve exactly.

To utilize only the drip feature, load the Squirt Drip Only preset and check its configuration. It completely disables the Stream particles (on the Burst Shape tab), produces only tiny amount of Spray particles (low Load and Particle Rate on the Squirt tab), and uses them to create a large and slowly emitting amount of drip drip particles (large Buildup Ratio on the Drip tab).

But that's possibly not even what you want/need. You can just load one of the Cum presets to female Squirt, they are all compatible. And then reduce the Burst Velocity, so they don't fly out fast. Also you don't want the Pelvis Force to be large, or non-zero at all. And you'll probably want to make the particles start small and enlarge over time, and have a large Spread Angle (since velocity will be very low, without that the particles would emit in a simple line)

It might still be tricky to make the effect look convincing, it should be slow and viscous. And you can't really simulate viscosity with Unity particles, which is what drives the motion of the fluids. You can try to reduce the Gravity and Simulation Speed on the Advanced tab to somewhat emulate that.

LeChuck99 · 2025-05-11T08:56:42-0400

shidyhartha said:
I would like to use only the "drip" function of this plugin on the female. I can't seem to figure it out. Is it possible? Would it be possible to create such feature in this plugin so that I can either trigger only the drip? I would like to simulate that after the male atom cums in the female, she starts to "leak" and drip all the cum.

yapp i tryed it. It works fine. I had deactivated the collider functions in the plugin + loaded to the dildo custom unity asset in adition the collision mnager plugin and set it to ignore the atom where i want to attach it.
But i already read right now here, that you can also set the alpha down etc. I tryed only the variant with scale it down and deactivated all colliders for it. Then i can use the fluid part in every detail as it is. Works perfectly for me.

Edit: i set up a fast scene, a vomiting drunk girl in the metro. I dont had the time to set up some cum blowjob scene, lol Works with the dildo plugin without probs.

Foost · 2025-05-11T09:00:45-0400

I tried to create a preset looking somewhat like a cum leak, and it's indeed tricky. I'll most likely have to implement special simulation and maybe even rendering shape for the effect to look convincing. One day. It won't be simple.

Here is what I managed to achieve, with the preset attached. I'd say it looks ok-ish, but still more like a slow squirt than a leak. And the emitter can't be placed inside, because then the particles collide immediately and just fall down.

(oh and I recorded the vid without a cursor, go me!)

shidyhartha · 2025-05-11T10:45:05-0400

Foost said:
I tried to create a preset looking somewhat like a cum leak, and it's indeed tricky. I'll most likely have to implement special simulation and maybe even rendering shape for the effect to look convincing. One day. It won't be simple.

Here is what I managed to achieve, with the preset attached. I'd say it looks ok-ish, but still more like a slow squirt than a leak. And the emitter can't be placed inside, because then the particles collide immediately and just fall down.

(oh and I recorded the vid without a cursor, go me!)

View attachment 487729

That looks good, but yeah still more on the side of squirt, not a leak. Thanks for trying though. I'll be waiting and hope to see it being implement.

shidyhartha · 2025-05-11T10:47:07-0400

LeChuck99 said:
yapp i tryed it. It works fine. I had deactivated the collider functions in the plugin + loaded to the dildo custom unity asset in adition the collision mnager plugin and set it to ignore the atom where i want to attach it.
But i already read right now here, that you can also set the alpha down etc. I tryed only the variant with scale it down and deactivated all colliders for it. Then i can use the fluid part in every detail as it is. Works perfectly for me.

Edit: i set up a fast scene, a vomiting drunk girl in the metro. I dont had the time to set up some cum blowjob scene, lol Works with the dildo plugin without probs.

I am not sure if I understand what you did, because I do not have much experience with this plugin. Thanks for sharing the idea tho

Plugins + Scripts SexyFluids

New member

Attachments

Well-known member

New member

New member

Attachments

Well-known member

Well-known member

New member

Well-known member

New member

Attachments

Well-known member

New member

Well-known member

New member

New member

Member

Active member

New member

Member

Active member

Well-known member

Well-known member

New member

Attachments

Well-known member

Attachments

Active member

Active member