Tested using a Lovense Ferri, via Intiface BT and VamSync, other vibes might need tweaks?
Install https://hub.virtamate.com/resources/toyserialcontroller-vamlaunch.12663/
Follow instructions there to get set up.
Click "Load Preset." If you want, you can just extract the F6.json file and put it in the ToySerialController_VamLaunch preset's folder.
Otherewise, you'll want to click"Root" under Current Directory -> AddonPackages -> Minnbicchi.PantyVibePreset.#.var/Custom
Settings:
Device Speed Multiplier: increase this is you're not getting the max vibe out of your toy even if your legs start to cramp. Decrease it if you hit the max vibe speed too easy. This mostly affects repetitive movements from my experience.
Device Axis Multiplier: increase this if you feel you have to travel too far along the shaft to get a response, decrease this if every little movement sends the device into overdrive.
L0: End point, is where it considers "max depth" lowering this is useful if you can't quite get all the way down, since it'll consider "max penetration" to be a shorter travel distance, this might be preferable to increasing the axis multiplier. Start point, is where it consiiders penetration to start.
And don't forget to set the correct Atom.
Set the "Male" setting at the bottom of the settings to your avi, yes even if the avi is female, the code and UI were written for men.
If you are using this with a male avi, open L0 at the top, and uncheck "invert axis"
Female should be the Male target, or you can leave it to auto, Auto seems to work well, and it means any Avi can trigger the vibe.
Install https://hub.virtamate.com/resources/toyserialcontroller-vamlaunch.12663/
Follow instructions there to get set up.
Click "Load Preset." If you want, you can just extract the F6.json file and put it in the ToySerialController_VamLaunch preset's folder.
Otherewise, you'll want to click"Root" under Current Directory -> AddonPackages -> Minnbicchi.PantyVibePreset.#.var/Custom
Settings:
Device Speed Multiplier: increase this is you're not getting the max vibe out of your toy even if your legs start to cramp. Decrease it if you hit the max vibe speed too easy. This mostly affects repetitive movements from my experience.
Device Axis Multiplier: increase this if you feel you have to travel too far along the shaft to get a response, decrease this if every little movement sends the device into overdrive.
L0: End point, is where it considers "max depth" lowering this is useful if you can't quite get all the way down, since it'll consider "max penetration" to be a shorter travel distance, this might be preferable to increasing the axis multiplier. Start point, is where it consiiders penetration to start.
And don't forget to set the correct Atom.
Set the "Male" setting at the bottom of the settings to your avi, yes even if the avi is female, the code and UI were written for men.
If you are using this with a male avi, open L0 at the top, and uncheck "invert axis"
Female should be the Male target, or you can leave it to auto, Auto seems to work well, and it means any Avi can trigger the vibe.
